Deleting Logical Paths
Before deleting logical path(s), make sure that the remaining number of logical paths will be greater than the minimum number of paths setting. The delete path operation will fail if the number of remaining paths is equal to or less than the minimum number of paths.
To delete logical path(s), follow the procedure below. Not only the primary storage system administrator but also the secondary storage system administrator can perform this operation:
1.Ensure that the Storage Navigator main window is in Modify mode.
For detailed information about how to do this, please refer to Storage Navigator User’s Guide.
2.Ensure that the DKC Operation window is displayed.
3.In Display, select DKC.
4.Do either of the following:
–In the tree, select a remote storage system.
–In the list, select and
5.In the list, select the logical path(s) that you want to delete.
6.
7.Select OK to close the message.
8.In the DKC Operation window, locate the
–The
–The Preview list displays logical path(s) to be deleted.
–If you want to cancel deleting logical path(s), select and
9.Select Apply to delete logical path(s).
Note: If an error occurs, the rightmost column of the Preview list displays the error code. To view detailed information about the error,
Chapter 5 Configuring Storage Systems and Logical Paths |