USP V storage system in the TCz Synchronous secondary site:
–The USP V storage system must have TCz Synchronous installed.
–The USP V storage system must have URz installed.
–The USP V storage system must have TCz Synchronous secondary volume. Note: This volume will be used for creating a URz pair when disaster recovery is performed at the primary site.
–The USP V storage system must have URz master journal volume. Note: This volume will be used for creating a URz pair when disaster recovery is performed at the primary site or when you create a URz pair for delta resync operation.
–If you use Business Continuity Manager, you need to make settings on the storage system. Please refer to the Business Continuity Manager User's Guide for information about settings required for volume operations in remote sites.
USP V storage system in the UR secondary site:
–The USP V storage system must have URz installed.
–The USP V storage system must have a URz secondary data volume.
–The USP V storage system must have a URz master journal volume.
–If you use Business Continuity Manager, you need to make settings on the storage system. Please refer to the Business Continuity Manager User's Guide for information about settings required for volume operations in remote sites.
Setup Procedure
This section explains the procedure for setting up a 3DC
To set up a 3DC
1.Install TCz Synchronous and URz. Configure ports and journal groups; journal groups must be configured for storage systems in the three sites.
2.In the primary site, create a TCz Synchronous pair.
3.Wait until the status of the TCz Synchronous pair becomes Duplex.
4.In the primary site, create a URz pair.
5.When creating a URz pair, be sure to select a value from 1 to 3 as the mirror ID.
6.Wait until the status of the URz pair becomes Duplex.
7.If you want to create a URz pair for delta resync operation, go to the next step.
Chapter 3 Preparing for Universal Replicator z/OS Operations |
