Changing Options for a Data Volume Pair
The Change Pair Option window allows you to change options for a pair of data volumes.
To change the pair options, follow the procedure below. Note that only the administrator of the primary storage system can perform the following operation. The administrator of the secondary storage system cannot perform the following operation:
1.Ensure that the Storage Navigator main window is in Modify mode.
For detailed information about how to do this, please refer to the Storage Navigator User's Guide.
2.Ensure that the Pair Operation window is displayed.
3.In the list, select and
Caution: You can only change options for pairs in Duplex, or Suspend, Hold, or Hlde status. If you select a pair in another status, you cannot go on to the subsequent steps.
4.From the
5.In the Change Pair Option window, change pair options and select Set.
Note: If two or more pairs are selected in the list, the
6.See the Preview list in the Pair Operation window to check the settings that you have made.
–If you want to modify a setting, select and
–If you want to cancel a setting, select and
7.Select Apply to apply the changes that you have made.
Note: If an error occurs, the rightmost column of the Preview list displays the error code. To view detailed information about the error,
Chapter 8 Performing Pair Operations |
