Deleting a Journal Group
To delete a journal group from the primary storage system, log into the primary storage system and then perform the following operation.
To delete a journal group from the secondary storage system, log into the secondary storage system and then perform the following operation.
Note: You cannot delete master journal groups and restore journal groups You can only delete journal groups whose attribute is Initial.
1.Ensure that the Storage Navigator main window is in Modify mode.
For detailed information about how to do this, please refer to Storage Navigator User’s Guide.
2.Ensure that the Journal Operation window is displayed (see section Journal Operation Window).
3.Do either of the following:
–In the
–In the tree, select and 
).
4.Select JNL Groups and Delete JNL from the
5.See the Preview list to check the journal groups that you want to delete.
–If you want to cancel deleting a journal group, select and
–If necessary, you can repeat steps 3 to 5 to specify other journal groups.
6.Select Apply to apply the settings.
Note: If an error occurs, the rightmost column of the Preview list displays the error code. To view detailed information about the error,
Chapter 6 Configuring Journal Groups |
