•System configuration for remote copy operation by URz from USP V to TagmaStore USP/NSC.
•System configuration for remote copy operation by URz from TagmaStore USP/NSC to USP V.
The following are described for the connection between USP V and TagmaStore USP/NSC.
•System option mode (see section 3.8.1)
•Logical storage system (LDKC) that can be connected to TagmaStore
USP/NSC
•Volume pair that can create pairs
•Connection with TagmaStore USP/NSC in 3DC remote copy configuration
•Connection with TagmaStore USP/NSC when using extended consistency groups
System Option Mode
When you execute remote copy by connecting USP V with TagmaStore USP/NSC, system option mode XXX needs to be set to OFF to. For detailed information about the system option mode XXX, see Table
Table 3-16 System Option Mode XXX
Mode
XXX
Description
ON: The format of the serial number of the logical storage system (LDKC) 00 of USP V is five- digit alphanumeric characters (serial number of the LDKC).The serial number reported to or displayed in the hos to SVP is the is
OFF: The format of the serial number of the logical storage system (LDKC) 00 of USP V is
Note: The default value for mode XXX is OFF.
Logical Storage System (LDKC) that Can be Connected to TagmaStore USP/NSC
When you execute remote copy by connecting USP V with TagmaStore USP/NSC, configure a logical path between LDKC of USP V and TagmaStore USP/NSC. In this case, the logical path can be configured only between LDKC00 of USP V and TagmaStore USP/NSC. Therefore, you cannot configure a logical path between LDKC01 of USP V and TagmaStore USP/NSC. (see Figure
Chapter 3 Preparing for Universal Replicator z/OS Operations |
