Pair Operation Window

To manipulate pairs of primary and secondary data volumes, use the Pair Operation window.

To display the Pair Operation window, do either of the following:

If Universal Replicator for z/OS has not been started:

a.Use your Web browser to display the storage device list. In the storage device list, select the storage system to log in. Enter a user name and the password, and then click OK.

The Storage Navigator main window is displayed.

Note: For detailed instructions on this step, please refer to Storage Navigator User’s Guide.

b.Click Go, Universal Replicator for z/OS and then Pair Operation on the menu bar of the Storage Navigator main window.

URz starts and the Pair Operation window is displayed.

If Universal Replicator for z/OS has already been started:

1.Select the Pair Operation tab.

The Pair Operation window is displayed.

Figure 4-2 Pair Operation Window

Chapter 4 Using the Universal Replicator for z/OS GUI

4-7

Hitachi Universal Replicator for IBM /OS User’s Guide

Page 141
Image 141
Hitachi MP-96RD625-01 manual Pair Operation Window