Deleting Data Volumes from a Mirror (Ending a copy operation)
A mirror is a combination of a master journal group and a restore journal group. If you delete data volumes (i.e., the primary data volume and the secondary data volume) from a mirror, the copying of data from the master journal group to the restore journal group will end.
To delete data volumes from a mirror, follow the procedure below. Not only the primary storage system administrator but also the secondary storage system administrator can perform this operation:
1.Ensure that the Storage Navigator main window is in Modify mode.
For detailed information about how to do this, please refer to Storage Navigator User’s Guide.
2.Ensure that the Journal Operation window is displayed.
3.Do either of the following:
–In the tree, select a master journal group (
) or a restore journal group (
) from below Registered.
–In the tree, select Journal Groups or Registered and then select a master journal group (
) or a restore journal group (
) from the list to the right.
The list displays a list of mirrors. One row in the list represents one mirror.
4.Locate mirrors that are not in Initial status.
5.From the mirrors, select and
6.From the
7.See the Preview list to check the settings that you have made.
–If you want to cancel a setting, select and
–If necessary, you can repeat steps 3 to 7 to specify other mirrors.
8.Select Apply to delete data volumes from the mirror(s).
Note: If an error occurs, the rightmost column of the Preview list displays the error code. To view detailed information about the error,
Chapter 6 Configuring Journal Groups |
