Intel IXF1104 Absolute Maximum Ratings, Parameter Symbol Min Max Units Comments, VDD2, VDD3, Topa

IXF1104 4-Port Gigabit Ethernet Media Access Controller

7.0Electrical Specifications

Table 39 through Table 58 “LED Interface AC Timing Parameters” on page 153 and Figure 35 “SPI3 Receive Interface Timing” on page 136 through Figure 52 “LED AC Interface Timing” on page 153 represent the target specifications of the following IXF1104 interfaces:

—SPI3

—JTAG

—MDIO

—Pause Control

—CPU

—LED

—System

—GMII and RGMII

—SerDes

—Optical Module

These specifications are not guaranteed and are subject to change without notice. Minimum and maximum values listed in Table 41 “Intel® IXF1104 MAC DC Specifications” on page 133 through Table 58 “LED Interface AC Timing Parameters” on page 153 apply over the recommended operating conditions specified in Table 40.

Table 39. Absolute Maximum Ratings

Parameter		Symbol	Min	Max	Units	Comments
		VDD	-0.3	2.2	volts	Core digital power
		VDD2, VDD3	-0.3	4.25	volts	I/O digital power
Supply voltage		VDD4, VDD5	-0.3	4.25	volts	I/O digital power
		AVDD1P8_1/2	-0.3	2.2	volts	Analog power
		AVDD2P5_1/2	-0.3	4.25	volts	Analog power
Operating	Ambient	TOPA	-40	+85	°C	Copper mode
temperature	Ambient	TOPA	0.0	+70	°C	Fiber mode
Storage temperature		TST	-40	+150	°C	–

Caution: Exceeding these values may cause permanent damage to the device. Functional operation under these conditions is not implied. Exposure to maximum rating conditions for extended periods may affect device reliability.

Datasheet 131

Document Number: 278757

Revision Number: 007

Revision Date: March 25, 2004