File – Import – Digitizer – One Scan (When VIVID 700 is Selected)

Performing One Scan with the VIVID 700

This command is used to cause the VIVID 700 (VI-700) to scan the object one scan at a time using the remote control function of this software.

Warning

Never stare into the laser emitting window.

Do not place a lens, mirror or optical element in the passage of the laser beam. Doing so may converge the laser beam, resulting in damage to your eyes, burns or fire. To prevent the above accidents, make sure that a wall or similar which can block the laser beam is located behind the object.

Memo

Before performing the procedure below, make sure that the digitizer you are going to use is selected by the File

– Select Digitizer command.

Ref. For details of the File – Select Digitizer command, refer to page 144.

Chapter 2

File

Menu

Operating Procedure

1 From the [File] menu, select [Import], [Digitizer] and then [One Scan].

The [File-Import-Digitizer-One Scan] dialog box will appear.

•The color monitor image currently captured by the VIVID 700 will appear in the “Color” area of the dialog box. (No color image will appear if the

[Auto read] checkbox is unchecked even if the [Option] checkbox is checked.)

2 Set an object in place.

3 Move the Zoom bar to set the desired view angle.

A new color image captured from the specified view angle will appear. (No color image will appear if the [Auto read] checkbox is un- checked.)

4 Set optional parameters.

Check the [Option] checkbox, and make necessary parameters.

• To set the scan reference position ([Distance])

and laser intensity ([Laser Intensity] ), perform 700 the following procedure.

q Check the [Option] checkbox. w Check the [Manual] checkbox.

eMove the Distance bar or Laser Intensity bar to the desired position.

•If you are not going to scan both color and range images at the same time, uncheck the [Auto read] checkbox.

103