5 If you are going to use the turntable, set the serial port and rotating stage type to be used under the Hardware tab.
6 Set optional parameters.
7 In the [General] tab, click the [Scan] button.
Scan will start, and both color and range images will be displayed.
•If the color and range images are not scanned at the same time, clicking the [Color Read] button or double- clicking on the image will capture a color image and display it.
•Dragging the mouse on the color image will enlarge the image. If necessary, enable color correction such as
“Dark”, “Log” and “Smooth” in the [Camera1] tab, and load the color image again.
•To restart scan, repeat steps 2 to 4. If necessary, click the [Mono] button to display a monochrome image.
8 In the [General] tab, click the [Convert] button.
The
File – Import – Digitizer – One Scan (When VIVID 900/910 is Selected)
Chapter 2
File
Menu
Memo
•In the range image, areas comprised of regular data are shown in color.
•In High Quality mode, data for which laser intensity was too high are displayed in bright gray, while data for which intensity was too low are displayed in dark gray.
910
900
75