File – Import – Digitizer – PC Card (When VIVID 700 is Selected)
nLoading the Selected Data ([Load] button)
The [Load] button is used to load the data of the selected file from the memory card to the software.
Operating Procedure
Before starting the following procedure, make sure that the
1
2
3
4
From the file list, select the file you want to load.
Click the [Load] button.
A dialog box will appear, allowing you to enter the desired element name.
The file name in the memory card will be displayed as an element name.
Change the element name if necessary, and set the parameters.
Click the [OK] button.
The data of the selected file will be loaded and displayed in the element view window. The names of the imported elements will also appear in the element list, indicating that the elements have been selected (highlighted).
•Select the desired rate from “1/1”, “1/4”, “1/9”, “1/16” and “No polygon” by selecting from the [Reduction Rate]
•If you want to generate points to fill in holes caused by missing data, set the [File Holes] set- ting to “On”.
•The [Remove]
You can set this to any of the following: “None”, “Boundary(B.)”, “5deg. & B.”, “10deg. & B.”, “15deg. & B.”, or “20deg. & B.”
•If you want to filter the imported data, select the appropriate parameter from the [Filter]
•The loaded data will be ready to be displayed in all windows. It will be displayed in the active window and the windows for which all the ele- ments are set to be displayed.
•When the data is loaded for the first time after the software is started, it will be fully framed in all the windows including those that are hidden.
Memo
A clock icon will be displayed during loading.
Chapter 2
File
Menu
700
113