View – Zoom

[Z] (Effective while held down)

Enlarging/Reducing the Displayed Item

This command is used to enlarge (zoom-in) or reduce (zoom-out) the displayed item, or to move the camera to change the view angle.

Ref. For a description of camera position, refer to the View – Camera Settings command (page 155).

Note

View – Zoom mode will be active when this command is selected. To cancel the View – Zoom mode, execute the View

–Zoom command again. However, if you are executing this command using the shortcut key, the View – Zoom mode can be canceled by releasing the key.

Left

: zoom-in, zoom-out

Middle ([Shift] + Left)

: –

Right

: Drags the camera.

Operating Procedure

Chapter 2

View

Menu

1 Click [Zoom] on the [View] menu.

2 Drag the item in an element view window while holding down the left mouse button.

Dragging the item upward will enlarge it (zoom-in) and dragging it downward will reduce it (zoom-out).

•To move the camera (i.e. drag the camera), drag while holding down the right mouse button.

Memo

The element will be displayed in simple form during zoom and drag. It will be displayed in detailed form when zooming or dragging is canceled.

9i

910

900

700

300

149