File – Import – Digitizer – Step Scan (When VIVID 900/910 is Selected)

13 Click the [Convert] button.

The [File-Import-Digitizer-Step Scan-Convert] dialog box will appear.

 

14Enter the desired element name, and

 

 

set parameters.

Chapter 2

 

File

Note

Menu

The element name must consist of up to 31 alphanu-

 

 

meric characters.

 

15 Click the [OK] button.

 

Each scanned image will be subjected to reg-

 

istration and displayed, and the “Proceed to

 

registration?” message dialog box will appear.

 

The element list will also show the element

 

name specified at step 14 plus “rotation step”.

 

The element name is highlighted, indicating

 

that it is currently selected.

 

• The loaded data will be ready to be displayed in

 

all windows. It will be displayed in the active

 

window and the windows for which all the ele-

 

ments are set to be displayed (i.e. the windows

 

that are not set to “Selective”).

 

• When the data is loaded for the first time after

910

the software is started, it will be fully framed in

900

all the windows including those that are hidden

 

 

automatically.

 

• If a rotating stage has been designated, the rotat-

 

ing stage will rotate back to the original position

 

before data reading starts.

Select the desired rate from “1/1”, “1/4”, “1/9”, “1/16”, and “No polygon”, by selecting from the [Reduction Rate] pull-down menu.

If you want to generate points to fill in holes caused by missing data, set the [File Holes] setting to “On”.

The [Remove] pull-down menu lets you select which points to remove from the imported data.

You can set this to any of the following: “None”, “Boundary(B.)”, “5deg. & B.”, “10deg. & B.”, “15deg. & B.”, or “20deg. & B.”

If you want to filter the imported data, select the ap- propriate parameter from the [Filter] pull-down menu.

If you want to save the raw scan data (.cdm) when importing, check the [Save CDM] checkbox.

If the [Save CDM] checkbox was checked at step 14, the [Remote-Save] dialog box will appear before the dialog box that asks whether you want to perform fine-registration.

q Enter the desired file name.

w Click the [Save] button.

Note

The file name must consist of alphanumeric characters only.

88