Chapter 2

View

Menu

View – Orbit

[O] (Effective while held down)

Rotating / moving camera (view point) position

This command is used to rotate the camera at the point of interest. In addition, camera position can also be moved (dragged).

Memo

Use of a mouse equipped with wheel function enables screen zoom-in/-out by turning the wheel.

Note

•This command is effective only for the “Isometric” or “Perspective” element view window.

•View – Orbit mode will be active when this command is selected. To cancel the View – Orbit mode, execute the View – Orbit command again. However, if you are executing this command using the shortcut key, the View – Orbit mode can be can- celed by releasing the key.

Left

: Rotates the camera in the desired direction.

Middle ([Shift] + Left)

: -

Right

: Moves the camera position (Drags Camera).

 

∗ Enables screen zoom-in/-out by turning the wheel.

Operating Procedure

1 Click [Orbit] on the [View] menu.

2 Drag the item in an element view window while holding down the left mouse button.

The element will rotate in the direction it is dragged.

9i

910

900

700

300

•Camera position can be moved while holding down the right mouse button and dragging. Use of a mouse equipped with wheel function enables screen zoom-in/-out by turning the wheel.

•Dragging while holding down the right button will move the camera position.

Memo

Element will be displayed in simple form while camera position is moved (dragged). It will be displayed in detailed form when dragging is canceled.

148