Konica Minolta File – Import – Digitizer – PC Card (When VIVID 700 is Selected)

File – Import – Digitizer – PC Card (When VIVID 700 is Selected)

Importing Data from the Memory Card of VIVID 700

This command is used to remote-control the data stored in the memory card of the VIVID 700 (VI-700).

Note
		Memo
This command does not operate on step-scan scan data	Before performing the procedure below, make sure that
in the memory card.	the digitizer you are going to use is selected by the File
	– Select Digitizer command.
			For details of the File – Select Digitizer command,
		Ref.
			refer to page 144.

Operating Procedure

1 From the [File] menu, select [Import], [Digitizer] and then [PC Card].

The [File-Import-Digitizer-PC Card] dialog box will appear.

Memo

Upper-case file names specified using the camera will be converted to lower-case file names when the files are imported to this software.

Chapter 2

File

Menu

2 Select the file you want to import.

•To display the preview image, check the [Preview Image] checkbox (so that a check mark appears in the check box). A color image of the selected file will be displayed.

Memo

	A clock icon will be displayed during loading.
Parameters for [File-Import-Digitizer-PC Card] Dialog Box
File name	Displays file names stored in the memory card.
Date	Displays the dates on which the files are stored in the memory card.
Size	Displays the size of each file (in bytes).
Total ∗∗ files	Displays the total number of camera data files stored in the memory card.
		700
∗∗ MB/ ∗∗ MB	Displays the unoccupied capacity and total capacity of the memory card.

111