Konica Minolta nMeasuring an Angle ([Angle])

Tool – Measure

nMeasuring an Angle ([Angle])

Use the following procedure to measure the angle formed by three specified points on the selected ele- ment.

Operating Procedure

	1	Check on the [Angle].
	2	Specify the first point on the element by
Chapter 2
		clicking on it.

The specified point will be displayed in an element view window.

Memo

If you want to redo the point specifying, click the Right mouse button at anywhere.

Tool

Menu

9i

910

900

700

300

3 Specifyit. the second point by clicking on

Memo

If you want to redo the point specifying, click the Right mouse button at anywhere.

4 Specify the third point by clicking on it. The angle defined by the three specified points is calculated, and the calculated results will be displayed in the upper-right window of the [Tool – Measure] dialog box, and two lines - connecting the first point to second point and second point to third point - will be displayed in an element view window.

		Memo
	To calculate the next angle, click the Right mouse button
	on the next point.
Parameters Returned When Measuring an Angle ([Angle])
Angle	Angle formed by the three points, in degrees. (White lines in an element view window.)
Point 1	Coordinates of the first specified point. (Yellow point in an element view window.)
Point 2	Coordinates of the second specified point. (Yellow point in an element view window.)
Point 3	Coordinates of the third specified point. (Yellow point in an element view window.)

238