Konica Minolta manual 79

File – Import – Digitizer – One Scan (When VIVID 900/910 is Selected)

Parameters for [File-Import-Digitizer-One Scan] Dialog Box

AF	Executes auto-focus.
Mono	Displays a monochrome monitoring image.
Color	Takes and displays a color picture.
Pitch	Displays previously scanned pitch image. (This button appears only if you are using two inter-
	connected VIVID units.)
General Tab
Distance	Checking this checkbox sets [Distance] on.
Intensity	Checking this checkbox sets [LD] and [Gain] on.
LD	Sets the intensity of the laser beam.
Gain	Sets the gain.
Focus Lock	Locks the focus. When you select this item, the program automatically places checks in the [Dis-
	tance] and [Intensity] checkboxes, and displays the currently set position, the current laser-beam
	intensity, and the gain value.
Scan	Executes scanning from the VIVID unit.
Color Read	When you press this button after taking a scan, the program takes a color shot and updates the
	picture on the display. This button is effective only after scanning, and only if [Use Texture] is
	checked and [Auto Read] is unchecked.
Convert	Use when you want the program to load camera data. Opens the [File-Import-Digitizer-One
	Scan-Convert] dialogbox.
Export	Export scanned data in various data formats.
Go	Sequentially executes those of the following functions that are checked: [AF], [Scan], [Convert],
	[Export], and [Close].
Camera 1 Tab	Note that the program runs a SCSI check when the dialog tabs are generated. If the check re-
	veals that two camera units are connected, the dialog will display a [Camera 2] tab as well as the
	[Camera 1] tab. The control content of both tabs will be identical.
Log	If this checkbox is checked, the program applies log correction for color data. Use when you
	want to brighten up neutral color.
Smooth	If this checkbox is checked, the program applies smoothing to color data. Use if illumination is
	low and the image is unclear.
Dark	IIf this checkbox is checked, the program applies dark correction to color data. Use if you are
	getting striation-type noise in the images.
Color Level	Checking this checkbox		sets the program to use color exposure level.
Threshold	Checking this checkbox		sets the program to use a threshold for distance-image creation.
Fine/Fast	Selects the scan mode.
Dynamic Range Expan-	If this checkbox is checked, the program takes multiple shots so as to expand the dynamic range
sion Mode	and reduce data loss. This button is displayed only for the VIVID 910.
High Quality Mode	If this checkbox is checked, the program includes display of low-reliability data. On the range im-
	age, data for which laser intensity was too high appear in light gray, while data for which intensity
	was too low are shown in dark gray. This checkbox appears only if you using the VIVID 910.
Use Texture	Checking this checkbox enables use of color images when converting and exporting.
		Memo
	Note that if you use the [Go] button, the program will automatically load color data after scan-
	ning, regardless of whether [Auto Read] is checked.
Auto read	Checking this checkbox enables auto-read operation. If auto-read is enabled, the program will load
	data after scanning (after the [Scan] button is clicked), with no need to click the [Color Read] button.
Scan loop	Sets the number of scan iterations when taking multiple scans.
Auto Load Parameters	Causes the command to automatically load the parameter settings saved by the [Save Parameters]
	feature.
Save Parameters	Saves the parameter settings entered in the [Camera 1] tab.
Load Parameters	Loads the parameter settings saved by the [Save Parameters] feature.

Chapter 2

File

Menu

910

900

77