Konica Minolta manual 112

File – Import – Digitizer – Step Scan (When VIVID 700 is Selected)

Chapter 2

File

Menu

700

Parameters for [File-Import-Digitizer-Step Scan] Dialog Box

Turntable	Used to set the serial port and rotating stage type to be used for remote operation.
	Note
	If connecting to a SKIDS-60YAW unit, select “CSG-602R(Ver.1.0)” from the pull-down menu.
	If connecting to a SKIDS-60YAW (Ver. 2.0) unit, select “CSG-602(Ver.2.0)”.
Rotation step	Used to select the desired angle (degree) of the rotating stage from “90”, “60” and “Other”. If
	“Other” is selected, enter the desired rotation step.
Current Angle	Used to select the desired scan step (i.e. the angle at which scan is to be performed). “0” will be
	selected first when the dialog box is opened. It is possible to select the desired angle by clicking
	the angle currently displayed in [Current Angle] and selecting the desired angle from the pull-
	down menu that appears. If an angle at which scan has already been performed is selected again
	and the [Scan] button is clicked, the previously acquired image data will be overwritten.
Zoom	Used to set zoom level of the VIVID 700 (VI-700).
Scan	Causes the VIVID 700 (VI-700) to acquire a shot.
Option	If this checkbox is checked, the lower section of the [Remote-Step Scan] dialog box will be active,
	allowing you to set various parameters including [Distance], [Laser Intensity] and [Auto read].
Manual	If this checkbox is checked, the [Distance] and [Laser Intensity] parameters can be set.
Distance	Used to set the instrument’s scan reference position.
Laser Intensity	Used to set the laser beam intensity of the VIVID.
Auto read	If this checkbox is checked, a color image will be read automatically when the dialog box is
	opened. Even if the [Read] button is not clicked after the [Scan] button is clicked, the data will be
	read automatically after images are acquired, and the color image and range image will be dis-
	played in the dialog box. If there is no check mark in the [Option] checkbox, for instance when the
	software is just started up, the [Auto read] checkbox will be checked automatically.
Read	Clicking this button while there is no check mark in the [Auto read] checkbox will read data from
	the instrument and display the range image and the latest color image that were acquired when
	the [Scan] button was clicked last time in the dialog box. This button is effective only if the [Auto
	read] checkbox is unchecked.
Focus Lock	Sets the focus lock. The [Manual] checkbox will be checked automatically, and the current posi-
	tion and Laser Intensity will be displayed.
Convert	Causes the [File-Import-Digitizer-Step Scan-Convert] dialog box to appear, allowing import of the
	camera data to this software.
Parameters for [File-Import-Digitizer-Step Scan-Convert] Dialog Box
Reduction Rate	Selects the reduction rate to be applied when importing the data. You can select any of the follow-
	ing: “1/1”, “1/4”, “1/9”, “1/16”, or “No polygon”.
Fill Holes	Selects whether the programs fill in holes when importing the data. If the setting is “On”, the pro-
	gram will automatically generate points to fill in holes left by missing data.
Remove	Selects which the data the program excludes when carrying out the import. Select from an of the fol-
	lowing: “None”, “Boundary (B.)”, “5deg. & B.”, “10deg. & B.”, “15deg. & B.”, or “20deg. & B.”
	None:	Removal is not carried out when importing the data.
	Boundary(B.):	The program removes boundary points.
	5deg. & B.,10deg. & B., 15deg. & B., 20deg. & B.:
		The program removes boundary points, and also removes polygons within the
		specified angular range (5°, 10 °, 15°, or 20 °) to the view vector
Filter	None:	The program does not perform filtering when importing the data.
	Noise Filter (N.F.): When importing the data, the points that appear to be noise will be corrected
		according to other data.
Save camera data	Save the images as camera data.

110