Konica Minolta File – Import – Digitizer – PC Card (When VIVID 910 is Selected)

File – Import – Digitizer – PC Card (When VIVID 910 is Selected)

Importing Data from the Memory Card of VIVID 910

This command is used to remote-control the data stored in the memory card of the VIVID 910 (VI-910).

Note

This command does not operate on step-shot scan data in the memory card.

Operating Procedure

Memo

•Before performing the procedure below, make sure that the digitizer you are going to use is selected by the File

– Select Digitizer command.

Ref. For details of the File – Select Digitizer command, refer to page 144.

Chapter 2

File

Menu

1 From the [File] menu, select [Import], [Digitizer] and then [PC Card].

The [File-Import-Digitizer-PC Card] dialog box will appear.

Memo

• Only the raw image data (.cdm) scanned by the VIVID 910 (VI-910) or VIVID 900 (VI-900) will be displayed.

• Upper-case file names specified using the camera will be converted to lower-case file names when the files are imported to this software.

2 Select the file you want to import.

•To perform dark correction for the color data, check the [Dark Correction] checkbox.

•To display the preview image, check the [Pre- view] checkbox (so that a check mark appears in the check box). A color image of the selected file

will be displayed.

	910
Memo

	A clock icon will be displayed during loading.
Parameters for [File-Import-Digitizer-PC Card] Dialog Box
File name	Displays file names stored in the memory card.
Date	Displays the dates on which the files are stored in the memory card.
Size	Displays the size of each file (in bytes).
Total ∗∗ files	Displays the total number of camera data files stored in the memory card.
∗∗ MB/ ∗∗ MB	Displays the unoccupied capacity and total capacity of the memory card.

67