Build – Registration – Fine – Elements
Performing Fine Registration of Elements
This command is used to perform registration of the selected elements.
Operating Procedure
1 From the element list, select the desired elements.
Memo
It is possible to select two or more elements by clicking them while holding down the [Shift] or [Ctrl] key.
2 From the [Build] menu, select [Registra- tion], [Fine] and then click [Elements].
The
•The selected element will be ready to be dis- played in all windows. It will be displayed if it is not displayed in the active window or the windows for which all the elements are set to be displayed.
3 Set the base element, and then click the [OK] button.
The program executes fine registration for the selected elements, and displays a dialog asking whether results are satisfactory.
4 Click the [OK] button. The menu will be exited.
Chapter 2
Build
Menu
•To continue fine registration processing, click the [Repeat] button.
Memo
The [Error Average] and [Sigma] values are indicators of the correctness of the registration (the alignment).
In general, the closer to zero they are, the more accurate alignment is.
9i
910
900
700
300
185