Build – Subsample – Adaptively – Points
Reducing the Selected Points Adaptively
This command is used to reduce the points selected in the currently displayed element so that surface points density in
Memo
The elements selected before execution of this command will be divided to triangular polygons.
Operating Procedure
1 | From the element list, select one desired |
| ||
| element. |
| ||
2 | Select the desired points. |
| ||
3 | From the [Build] menu, select [Subsam- |
| ||
| ple] |
| ||
| The |
| ||
| log box will appear. |
| ||
| • The selected element will be ready to be displayed |
| ||
|
| in all windows. It will be displayed if it is not dis- |
| |
|
| played in the active window or the windows for |
| |
|
| which all the elements are set to be displayed. |
| |
4 | Set the parameters. |
| ||
5 | Click the [Apply] button. |
| ||
| The data of the selected points will be reduced | • If you change the parameter settings and click | ||
| according to the parameter settings so that | the [Apply] button again, the data comprising | ||
| surface points density in | the points will be reduced according to the new | ||
| is lower than that in | parameter settings. | ||
| • The polygons comprising the selected element |
| ||
|
| will be triangulated. |
| |
|
|
|
|
|
|
| Memo |
|
|
| In some cases, the number of vertices present after data |
| ||
| reduction may not match the specified number. |
| ||
6 | Click the [OK] button. |
| ||
| This will confirm execution of data reduction |
|
and close the dialog box.
Parameters for
Number of points | Reduces the current number of points to the specified number. When the [Apply] button is clicked, | ||
| the current number of vertices will be displayed. (The default for the “Number of points” param- | ||
| eter is set so that the number of selected points will be reduced by 50%.) | ||
Range of errors | The program reduces data in accordance with the value that you enter. The value serves as a gen- | ||
| eral yardstick for the amount of | ||
|
|
|
|
|
| Memo |
|
| The default setting is “0.2”. | ||
Fix boundary | Among the selected points, the points present on the boundary of the hole will be excluded from | ||
| data reduction. |
Chapter 2
Build
Menu
9i
910
900
700
300
209