Edit – Recalc LOD
Recalculating the Simplified Display Data
This command is used to recalculate the simplified display data of the element(s) selected in the element list.
Note
This feature is disabled if you have set [Use LOD] to “Off” in the
Memo
The simplified display data is displayed, for example, while the camera is dragged. If recalculation is not performed, the data in effect when the element(s) was simplified lastly will be displayed. If necessary, recalculate the simplified display
data after the data is edited.
Operating Procedure
Chapter 2
1 From the element list, select the desired element.
2 Click [Recalc LOD] on the [Edit] menu. | Menu |
| Edit |
The simplified display data of the selected ele- |
|
ment will be recalculated. |
|
Note
An error message may appear if the selected element contains an excessively small number of polygons.
9i
910
900
700
300
179