View – Move Plane

[A] (Effective while held down)

Setting Display Depth

This command is used to set the display depth by changing the position (Near Plane) where the target element starts to appear and the position (Far Plane) where it starts to disappear.

Left

: Near Plane

Middle ([Shift] + Left)

: Near Plane/Far Plane

Right

: Far Plane

Operating Procedure

1 Click [Move Plane] on the [View] menu.

Chapter 2

2 Click the point on the element where you want to set the display range.

• If you click with the left mouse button, the Near Plane will be set on the point you clicked. If you click with the right mouse button, the Far Plane will be set on the point you clicked.

• If you click with the middle mouse button ([Shift] + Left), the Near Plane/Far Plane (fixed depth) will be centered on the point you clicked.

View Menu

3 To move the plane, drag it.

•If you drag with the mouse left button pressed, the Near Plane will move. If you drag with the mouse right button pressed, the Far Plane will move.

•If you drag with the middle mouse button ([Shift]

+Left) pressed, the Near Plane/Far Plane (fixed depth) will move.

4 Press the [ESC] key.

View-Move Plane mode will be canceled.

9i

910

900

700

300

153