File – Import – Digitizer – Step Scan (When VIVID 300 is Selected)
Parameters for
Turntable | Used to set the serial port and rotating stage type to be used for remote operation. | |
| Note |
|
| If connecting to a | |
| If connecting to a | |
|
| |
Rotation step | Used to select the desired angle (degree) of the rotating stage from “90”, “60” and “Other”. If | |
| “Other” is selected, enter the desired rotation step.. | |
|
| |
Current Angle | Used to select the desired scan step (i.e. the angle at which scan is to be performed). “0” will be | |
| selected first when the dialog box is opened. It is possible to select the desired angle by clicking | |
| the angle currently displayed in [Current Angle] and selecting the desired angle from the pull- | |
| down menu that appears. If an angle at which scan has already been performed is selected again | |
| and the [Scan] button is clicked, the previously acquired image data will be overwritten. | |
|
| |
Scan | Causes the VIVID 300 | |
|
| |
Option | If this checkbox is checked, the lower section of the | |
| allowing you to set various parameters including [Distance], [Laser Intensity] and [Auto read]. | |
|
| |
Manual | If this checkbox is checked, the [Distance] and [Laser Intensity] parameters can be set. | |
|
| |
Distance | Used to set the VIVID’s scan reference position. | |
|
| |
Laser Intensity | Used to set the laser beam intensity of the VIVID. | |
|
| |
Auto read | If this checkbox is checked, a color image will be read automatically when the dialog box is | |
| opened. Even if the [Read] button is not clicked after the [Scan] button is clicked, the data will be | |
| read automatically after images are acquired, and the color image and range image will be dis- | |
| played in the dialog box. If there is no check mark in the [Option] checkbox, for instance when the | |
| software is just started up, the [Auto read] checkbox will be checked automatically. | |
|
| |
Read | Clicking this button while there is no check mark in the [Auto read] checkbox will read data from | |
| the instrument and display the range image and the latest color image that were acquired when | |
| the [Scan] button was clicked last time in the dialog box. This button is effective only if the [Auto | |
| read] checkbox is unchecked. | |
|
| |
Focus Lock | Sets the focus lock. The [Manual] checkbox will be checked automatically, and the current posi- | |
| tion and Laser Intensity will be displayed. | |
|
| |
Convert | Causes the | |
| camera data to this software. | |
|
| |
| ||
Parameters for | ||
|
| |
Reduction Rate | Selects the reduction rate to be applied when importing the data. You can select any of | |
| the following: “1/1”, “1/4”, “1/9”, “1/16”, or “No polygon”. | |
|
| |
Fill Holes | Selects whether the programs fill in holes when importing the data. If the setting is “On”, | |
| the program will automatically generate points to fill in holes left by missing data. | |
|
| |
Remove | Selects which the data the program excludes when carrying out the import. Select from | |
| an of the following: “None”, “Boundary (B.)”, “5deg. & B.”, “10deg. & B.”, “15deg. &B.”, or | |
| “20deg. & B.” |
|
| None: | Removal is not carried out when importing the data. |
| Boundary(B.): | The program removes boundary points. |
| 5deg. & B.,10deg. & B., 15deg. & B., 20deg. & B.: | |
|
| The program removes boundary points, and also removes polygons within the |
|
| specified angular range (5°, 10 °, 15°, or 20 °) to the view vector. |
|
|
|
Filter | None: | Removal is not carried out when exporting the data. |
| Noise Filter (N.F.): When importing the data, the points that appear to be noise will be corrected | |
|
| according to other data. |
|
| |
Save camera data | Save the images as camera data. | |
|
|
|
Chapter 2
File
Menu
300
125