10 Click the [OK] button.

the “Proceed to registration?” message dialog box will appear.

The element list will also show the element name specified at step 9 plus “rotation step”. The element name is highlighted, indicating that it is currently selected.

•The loaded data will be ready to be displayed in all windows. It will be displayed in the active window and the windows for which all the ele- ments are set to be displayed (i.e. the windows that are not set to “Selective”).

•When the data is loaded for the first time after the software is started, it will be fully framed in all the windows including those that are hidden automatically.

•If a rotating stage has been designated, the rotat- ing stage will rotate back to the original position before data reading starts.

11 Click the [OK] button.

The object will be scanned sequentially at the step selected by Rotation Step. Registration of the scanned images will be performed using the saved chart data to convert them to 3D data, and the result will be displayed.

Note

The rotating stage may rotate in the opposite direction during measurement depending on its type.

File – Import – Digitizer – Step Scan (When VIVID 900/910 is Selected)

• If the [Save CDM] checkbox was checked at

step 9, the [Remote-Save] dialog box will appear

Chapter 2

before the dialog box that asks whether you want

to perform fine-registration.

File

Menu

q Enter the desired file name.

 

w Click the [Save] button.

 

Note

The file name must consist of alphanumeric characters only.

•If you are not going to perform fine-registration, click the [Cancel] button instead of the [OK] but- ton.

910

900

93