File – Import – Digitizer – Easy Align
Aligning Multiple Scans (for VIVID 910 only)
This program allows you to take and align multiple shots (multiple scans) of a single object using a VIVID
910.You use the program to remotely control the scans, and you attach markers onto the object so that the program can correlate the data taken from multiple shots (at multiple angles). The program aligns the data based on the markers, and displays the result.
Chapter 2
File
Menu
Left | : | Set marker correspondence |
Right | : | Edit/Add marker |
[Ctrl] + Right : Delete marker
Memo
•This command works only with the VIVID 910.
•To use all function of this command, connecting to VIVID 910 and the license will be required.
•Prior preparation (calibration) is required for the marker to be automatically recognized.
Ref. For details about the Automatic Marker Recognition , refer to page 131.
Operating Procedure
1 From the [File] menu, select [Import]
– [Digitizer] and click [Easy Align].
The program opens the
•If the VIVID 910 is connected, the monochrome monitor image currently captured by the VIVID 910 will appear in the work window area on the left of the dialog box.
910
• The very first time you use this command (with |
|
|
Memo |
| |
the VIVID 910 connected), the command begins |
| |
If the VIVID 910 is not connected when you first execute | ||
by displaying the [License Failure] dialog box. | this command, the [License Failure] dialog box will not | |
| appear and the program will not check for a license. You | |
| can continue directly from step 2 below. | |
| q Click the [OK] button. | |
|
| The |
|
| cense] dialog box opens. |
| w At the dialog, enter the license code that cor- | |
|
| responds to the displayed VIVID 910 serial |
|
| number, and then click [OK]. |
126