Konica Minolta Select – Boundary – Elements, Select – Boundary – Points

Select – Boundary – Elements

Selecting Only the Boundary of Holes of Element(s)

This command is used to select only the points on the boundary of holes among those comprising the selected element(s).

Memo

Selected points will be displayed in red, and unselected points will be displayed in blue.

Operating Procedure

1 From the element list, select the desired element(s).

Chapter 2

Select Menu

2 From the [Select] menu, select [Bound- ary] and then click [Elements].

Among the points comprising the currently selected element(s), the points on the boundary of holes will be selected and the other points will be unselected.

•The selected element(s) will be ready to be dis- played in all windows. It will be displayed if it is not displayed in the active window or the windows for which all the elements are set to be displayed.

Select – Boundary – Points

Selecting Only the Boundary of Holes of Points

This command is used to select only the points on the boundary of holes, among those currently selected.

Memo

Selected points will be displayed in red, and unselected points will be displayed in blue.

Operating Procedure

1 From the element list, select the desired element.

9i

910

900

700

300

2 Select the desired points.

3 From the [Select] menu, select [Bound- ary] and then click [Points].

Among the selected points, the points on the boundary of holes will be selected and the other points will be unselected.

•The selected element will be ready to be displayed in all windows. It will be displayed if it is not dis- played in the active window or the windows for which all the elements are set to be displayed.

162