File – Import – Digitizer – Step Scan (When VIVID 9i is Selected)

12 Click on the [Store] button.

The color data displayed in the Work window area will appear in the Store window area.

Chapter 2

File

Menu

Note

The [Store] button will be disabled (displayed in gray) when clicked once. This will prevent the same work window area’s data from being stored repeatedly.

•By clicking the [Store] button, each shot data other than the Calibration Chart data will be coordinate-converted around the rotational axis and displayed three-dimensionally in the element view window. If a setting other than “Free” is selected for [Rotation Step], the rotary stage will rotate at specified angles automatically. The angle shown in [Current Angle] will automatically be updated at the same time.

•This step is not necessary if the [Auto Store] checkbox has been checked.

13 Click the [Scan] button to acquire the second data.

Note

If “Free” is selected for [Rotation Step] in the [File-Import -Digitizer-Step Scan-Option] dialog box, the rotary stage must be rotated to the desired angle using the slide bar in advance.

9i

14 Click the [Store] button.

The data displayed in the Work window area will appear in the Store window area. If the corresponding points have been properly des- ignated, all the stored data will be displayed in 3-D in the element view window after it is registrated and three-dimensionalized.

•This step is not necessary if the [Auto Store] checkbox has been checked.

46