File – Import – Digitizer – Step Scan (When VIVID 9i is Selected)

Chapter 2

File

Menu

9i

Parameters for [File-Import-Digitizer-Step Scan] Dialog Box

AF

Executes auto-focus.

 

 

Note

 

 

This parameter is effective only when VIVID 9i is connected.

Distance

Checking this checkbox enables distance setting.

 

 

 

 

Intensity

Checking this checkbox enables LD and Gain setting.

 

• LD:

Sets the laser power.

 

• Gain:

Sets the gain. The gain cannot be set if the “Standard” scan mode has been selected.

Auto Scan

Checking this checkbox causes scan, store and stage control operations to be automatically

 

performed sequentially.

Scan

Performs a scan.

 

 

Note

 

 

This parameter is effective only when VIVID 9i is connected.

Import CDK

Imports the stored data (CDK) that was scanned by the VIVID 9i.

 

 

 

 

Color Read

Takes a color shot. Clicking this button at the end of scan will take a color shot again and display

 

the updated color image.

 

 

Note

 

 

This button is effective if the [Use Color] checkbox is checked.

Edit

Clicking this checkbox enables you to delete the area that is not necessary for threedimensionaliza-

 

tion by specifying it in the work window using the mouse.

Auto Store

Checking this checkbox performs store operation automatically at the end of scan operation.

 

 

 

 

Store

Registers the data p resent in the Work window area as store data, puts it into three-dimensional

 

form and displays it in the element view window.

Mono/Color/Pitch

Switches display mode for the data currently displayed in the Work window area.

 

• Mono: The current image is displayed in monochrome. This parameter is effective only when

 

 

 

 

VIVID 9i is connected.

 

• Color:

The color data acquired from the scan is displayed.

 

• Pitch:

The color display is done in accordance with the distance data from Near to Far.

Current Angle

The current step angle is displayed. Normally, the angle is updated when a store operation is car-

 

ried out, so additional operations are not necessary. When the step angle has been changed to the

 

desired angle manually, data scan can be performed at the new step angles.

 

 

 

 

 

 

 

Memo

 

 

 

This item is not displayed if “Free” is selected for [Rotation Step].

Angle

Rotates the rotary stage to the desired angle using the slide bar.

 

This item is displayed when the rotary stage has been initialized successfully.

Chart Scan

Used to scan the Calibration Chart data.

 

 

 

 

 

 

 

Memo

 

 

 

This item is displayed if “Free” is selected for [Rotation Step].

Stage Apply

Initializes the rotary stage.

 

 

 

 

Prev/Next

Switches from one stored data to another.

 

[Prev] button: Displays the previous data.

 

[Next] button: Displays the next data.

Delete

Deletes the stored data currently displayed in the Work or Store window area. The corresponding

 

elements in the element view window are also deleted at the same time.

View

Displays/hides the data currently displayed in the Store window area into the element view window.

 

 

 

 

OK

Keeps the element data created during command execution and exits the File-Import-Digitizer-

 

One Scan command.

 

 

Note

 

 

If the [Save Raw Data] checkbox is checked, the data save dialog box is displayed.

Cancel

Exits the File-Import-Digitizer-One Scan command.

 

The element data created during command execution will be deleted.

Option

Displays the [File-Import-Digitizer-Step Scan-Option] dialogbox.

 

 

 

 

Calibration

Executes the Calibration command and calibrates the VIVID 9i.

 

 

Note

 

 

Have the Field Calibration System ready.

 

 

 

For details on user calibration, refer to VIVID 9i Instruction Manual.

 

 

Ref.

 

 

 

 

 

48