File – Import – Digitizer – One Scan (When VIVID 900/910 is Selected)

Chapter 2

File

Menu

Parameters for [File-Import-Digitizer-One Scan] Dialog Box

Hardware Tab

 

Auto SCSI ID

 

Check this checkbox if you want the program to automatically check SCSI connections for VIVID

 

 

 

units. If this checkbox is not checked, the program will recognize VIVID units at specified SCSI IDs

 

 

 

only.

 

 

Mounted

 

• Vertical :

Check this checkbox if using the VIVID unit in vertical orientation.

 

 

 

• Horizontal : Check this checkbox if using the VIVID unit in horizontal orientation.

 

 

 

 

 

Apply

 

When you click the [Apply] button after selecting the serial port and rotating stage, the [Angle]

 

 

 

slidebar becomes effective and stage control is enabled.

 

 

 

Note

 

 

 

 

If connecting to a SKIDS-60YAW unit, select “CSG-602R(Ver.1.0)” from the pull-down menu. If connect-

 

 

 

ing to a SKIDS-60YAW (Ver. 2.0) unit, select “CSG-602(Ver.2.0)”.

 

Angle

 

This slidebar becomes enabled when the program determines that the rotating stage is operating

 

 

 

normally. You can use the slidebar to control the stage’s rotation.

 

 

 

 

 

 

Parameters for [File-Import-Digitizer-One Scan-Convert] Dialog Box

 

 

 

 

 

Reduction Rate

 

Selects the reduction rate to be applied when importing the data.

 

 

 

You can select any of the following: “1/1”, “1/4”, “1/9”, “1/16”, or “No polygon”.

 

 

 

 

 

Fill Holes

 

Selects whether the programs fill in holes when importing the data. If the setting is “On”, the pro-

 

 

 

gram will automatically generate points to fill in holes left by missing data.

 

 

 

 

 

Remove

 

Selects which the data the program excludes when carrying out the import. Select from an of the

 

 

 

following: “None”, “Boundary (B.)”, “5deg. & B.”, “10deg. & B.”, “15deg. & B.”, or “20deg. & B.”

 

 

 

None:

Removal is not carried out when importing the data.

 

 

 

Boundary(B.):

The program removes boundary points.

 

 

 

5deg. & B.,10deg. & B., 15deg. & B., 20deg. & B.:

 

 

 

 

The program removes boundary points, and also removes polygons within the

 

 

 

 

specified angular range (5°, 10 °, 15°, or 20°) to the view vector

 

 

 

 

 

Filter

 

None: The program does not perform filtering when importing the data.

 

 

 

Noise Filter (N.F.): When importing the data, the points that appear to be noise will be corrected

 

 

 

 

according to other data.

 

 

 

High Quality (H.Q.): The program filters out unreliable data. (Effective only when importing data

 

 

 

 

that was scanned using the VIVID 910.)

 

 

 

H.Q & N.F.:

Applies both noise filter and high quality filter. (Effective only when importing

 

 

 

 

data that was scanned using the VIVID 910.)

 

 

 

 

 

Save CDM

 

Save the images as camera data.

 

 

 

 

 

910

900

78