Chapter 2

File

Menu

File – Import – Digitizer – Step Scan (When VIVID 910 is Selected)

Performing Step Scan with the VIVID 910

This command is used to cause the VIVID 910 (VI-910) to make multiple shots of the object by controlling the rotary stage remotely from this software. Registration of multiple scan data can be performed using the Calibration Chart for extract center of rotation.

Warning

Never stare into the laser emitting window.

Do not place a lens, mirror or optical element in the passage of the laser beam. Doing so may converge the laser beam, resulting in damage to your eyes, burns or fire. To prevent the above accidents, make sure that a wall or similar which can block the laser beam is located behind the object.

Memo

• The calibration chart is an accessory of the rotating stage set.

• Before performing the procedure below, make sure that the digitizer you are going to use is selected by the File

– Select Digitizer command.

Ref. For details, refer to parameters (P.144) for [File-

Import-Digitizer-Step Scan-Option] dialog box.

nWhen Using Only the Rotating Stage

Operating Procedure

1 From the [File] menu, select [Import], [Digitizer] and then [Step Scan].

The [File-Import-Digitizer-Step Scan] dialog box will appear.

The monochrome monitor image captured by the VIVID 910 will appear in the Work window area of the dialog box.

If the Model folder contains the Chart data that is considered to be appropriate, it will be imported automatically.

910

58