Info – Points
Displaying Information for Points
This command is used to display information related to the points comprising the polygon selected in the selected element.
Operating Procedure
1 | From the element list, select one desired |
|
| element. |
|
2 | Select the desired point(s). |
|
3 | Click [Points] on the [Info] menu. |
|
| ||
Chapter 2 | ||
The |
|
•The selected element will be ready to be dis- played in all windows. It will be displayed if it is not displayed in the active window or the windows for which all the elements are set to be displayed.
Info
Menu
Note
Information for up to 20,000 points can be viewed. If the number of selected points exceeds 20,000, the information for those extra points will be omitted.
4 If you wish to output the displayed in- formation, click the [Export] button.
The program outputs the point coordinate data, in ASCII format.
5 Click the [OK] button. The dialog box will close.
Parameters for
No. | Serial No. of each point |
|
|
X, Y, Z | X, Y and Z coordinates |
|
|
Element name | Name of the element to which the point(s) belong |
9i
910
900
700
300
223