7 Set optional parameters.
• Check the [Convert] checkbox of the [Scan & Functions] in the [General] tab.
Note
If high measurement accuracy is required, set the dis- tance parameter in the [General] tab.
In the [General] tab, select the desired scan mode (Fine or Fast).
6
5 In the [Hardware] tab, select the de- sired rotation step from “90”, “60” and “Other” so that the rotating stage will rotate at the selected step.
If “Other” is selected, enter the desired rota- tion angle.
Note
The rotating stage may rotate in the opposite direction during measurement depending on its type.

File – Import – Digitizer – Step Scan (When VIVID 900/910 is Selected)

Chapter 2

File

Menu

Memo

To check whether the object is scanned properly when it is rotated, click [Check scanning area].

While the rotating stage rotates at the step selected by Rotation Step, the monochrome image acquired from each angle will be displayed in the preview area.

When the rotating stage completes one turn, it will return to the home position and the check is complete.

If any problem is detected, repeat step 4.

910

900

91