Edit – Undo | [Ctrl] + [z] |
Canceling the Previous Operation
This command is used to cancel the previous operation. This command can be performed for the number of times specified by the File – Preferences command.
Note
Execution of this command may not display simplified data.
Ref. For details of the File – Preferences command, refer to page 142.
Operating Procedure
1 | Click [Undo] on the [Edit] menu. | |
|
| The state in effect before the previous opera- |
|
| tion was performed will be restored. (In the |
|
| |
Chapter 2 |
| case of a command that activates a mode, the |
|
| state in effect before that command was per- |
|
| formed will be restored.) |
Edit
Menu
Memo
The Undo function cannot be used for the following.
•Commands in the [File] menu, except for those provided to import camera data and element data
•Commands in the [Info], [View], [File Import Digitizer] and [Window] menus
•Selection and display in the element list
•Commands in
•Changes to window properties
•Selection/unselection of elements in the element view windows
•Operations on image windows
9i
910
900
700
300
Edit – Redo | [Ctrl] + [Y] |
Performing the Canceled Operation
This command is used to perform the previous operation that has been canceled by the Edit – Undo command. It is possible to repeat this command up to the state in effect before the Edit – Undo was started.
Note
Execution of this command may not display simplified data.
Ref. For details of the Edit – Undo command, refer to page 168.
Operating Procedure
1 | Click [Redo] on the [Edit] menu. |
|
|
| The previous operation that has been can- |
|
|
| Memo |
| |
| celed by the Edit – Undo command will be | This command can be repeated until the state in effect | |
| performed. | before the Edit – Undo was performed is restored. |
168