6 To delete a pair of corresponding points, click either of those points with the middle button ([Shift] + Left).
The marker will be deleted.
Memo
Even when designating corresponding points, they can be deleted by clicking with the middle button ([Shift] + Left).
7 After designation of corresponding points has been completed, click the right mouse button.
The initial registration will start, and the result will be displayed in the window.
A message dialog box asking whether the result is satisfactory will appear.
8 Click the [OK] button.
The program executes fine registration, and opens a dialog asking whether the results are satisfactory.
9 Click the [OK] button.
All temporary registration windows close, and the program reopens the windows that were on display when you started the command.
Build – Registration – Initial – Manual
Note
An alarm will be heard if a point other those designated is clicked with the middle button ([Shift] + Left).
Chapter 2
Build
Menu
•If you click [Retry], the program will reopen the temporary windows so that you can reset the cor- respondences again.
•If you click [Cancel], fine registration will be canceled and closes the menu.
•To continue fine registration processing, click the [Repeat] button.
|
| 9i | |
Memo |
| ||
| 910 | ||
The [Error Average] and [Sigma] values are indicators of | |||
900 | |||
the correctness of the registration (the alignment). | |||
700 | |||
In general, the closer to zero they are, the more accurate | |||
300 | |||
alignment is. | |||
| |||
183