File – Import – Digitizer – Step Scan (When VIVID 900/910 is Selected)
4 In the [Hardware] tab, select the desired rotation step from “90”, “60” and “Other” so that the rotating stage will rotate at the selected step.
If “Other” is selected, enter the desired rotation angle.
Note
The rotating stage may rotate in the opposite direction during measurement depending on its type.
Chapter 2
File
Menu
5 In the [Camera1] tab, select the desired scan mode (Fine or Fast).
6 Set optional parameters.
Note
If high measurement accuracy is required, set the distance parameter.
910
9007 In the [General] tab, click the [Scan] button.
Scan will start, and both color and range im- ages will be displayed.
The “Next angle: ∗∗degree” message dialog box will also appear.
Memo
To check whether the object is scanned properly when it is rotated, click [Check scanning area].
While the rotating stage rotates at the step selected by Rotation Step, the monochrome image acquired from each angle will be displayed in the preview area.
When the rotating stage completes one turn, it will return to the home position and the check is complete.
If any problem is detected, repeat step 3.
80