File – Import – Digitizer – Step Scan (When VIVID 300 is Selected)
4 Set optional parameters.
Check the [Option] checkbox, and make necessary parameters.
Chapter 2
File | 5 Click the [Scan] button. |
Menu | |
| Scan will start, and both color and range im- |
| ages will be displayed. |
| The “Next shot? (angle:∗∗)” message dialog |
| box will also appear. |
6 Click the [OK] button.
The next specified angle will appear in [Current Angle], and the object will be scanned for the next image.
•If a rotating stage has been selected by the Turn- table, the stage will turn to the next angle and then the object will be scanned.
•To set the scan reference position (Distance) and laser intensity (Laser Intensity), perform the fol- lowing procedure.
q Check the [Option] checkbox. w Check the [Manual] checkbox.
e Move the [Distance] bar or [Laser Intensity] bar to the desired position.
•If you are not going to scan both color and range images at the same time, uncheck the [Auto read] checkbox.
•If the color and range images are not scanned at the same time, clicking the [Read] button will capture a color image and display it.
•If the type of rotating stage has not been desig- nated, turn the rotating stage manually to the next angle displayed in the “Next shot? (angle:**)” message dialog box.
•To cancel scan, click the [Cancel] button instead of the [OK] button, and repeat steps 4 to 5.
7 Repeat step 6 until shots from all the desired angles are captured.
When shots from all the desired angles are captured, the “Next shot? Please set the chart.” message dialog box will appear.
300
•If you want to acquire a shot from a certain angle again, click the angle currently displayed in [Cur- rent Angle] with the left mouse button, then select the desired angle from the
Memo
If an angle (rotation step) has been selected at step 3, necessary steps (angles) to complete 360 degrees will be displayed in the
122