File – Import – Digitizer – Step Scan (When VIVID 300 is Selected)

8 Place the calibration chart on the rotating stage.

Position the chart with the black line facing the instrument and place it on the rotating stage so that both entire side surfaces are observed in the viewfinder.

• If “Chart” is not displayed in [Current Angle], click the left mouse button and select “Chart” from the pull-down menu that appears.

Chapter 2

File

Menu

Memo

The calibration chart can be scanned at any angle of the rotating stage.

9

Click the [OK] button.

 

 

 

The calibration chart will be scanned.

Good example

Bad example

 

Note

 

 

 

 

 

 

Make sure that the acquired range image looks like the good example given below. If it resembles the bad example, click the [Scan] button again to re-scan the calibration chart.

10 Click the [Convert] button.

The [File-Import-Digitizer-Step Scan-Convert] dialog box will appear.

300

123