Build – Move – To X-Y-Z

nExtracting a Line

Extract a line from the selected points as explained below.

Operating Procedure The following steps must be carried out in Build – Move – To X-Y-Zmode.

1

Select the desired points.

 

 

 

 

Memo

 

 

 

 

• Select the points using the Select and View menu

com-

 

 

mands.

 

 

 

• After operation, please cancel the Select or View menu

 

 

 

command.

 

Chapter 2

2 Click the right mouse button.

The [Select Line Attribute] dialog box will ap- pear.

3 Select the desired line attribute from the pull-down menu.

4 Click the [OK] button.

The line direction will be displayed, and the [Question] dialog box will appear.

5 If you want to change the direction, click the [No] button.

The line direction will be changed, and the [Question] dialog box will reappear.

6 Click the [Yes] button.

The generated line will be displayed, and the [Confirmation] dialog box will appear.

7 Click the [OK] button.

Proceed to the extraction procedure for the next element (point or line).

•When you have completed extraction of all ele- ments: Right-click the mouse to open the Ques- tion dialog, and proceed to convert to the new coordinate system.

Parameters for [Select Line Attribute] Dialog Box

X-Axis

Generates the X-axis based on the selected points.

 

 

Y-Axis

Generates the Y-axis based on the selected points.

 

 

Z-Axis

Generates the Z-axis based on the selected points.

 

 

Build Menu

9i

910

900

700

300

197