Build – Move – To Origin
Moving the Element(s) to the Origin
This command is used to move the selected element(s) to the origin.
Operating Procedure
1 From the element list, select the desired element(s).
2 From the [Build] menu, select [Move] and then click [To Origin].
The selected element(s) will move in such a way that the center of gravity of all the constituent points is located at the origin.
•The selected element will be ready to be dis- played in all windows. It will be displayed if it is not displayed in the active window or the windows for which all the elements are set to be displayed.
Chapter 2
Build
Menu
9i
910
900
700
300
191