Konica Minolta File – Import – Digitizer – PC Card (When VIVID 900/910 is Selected)

File – Import – Digitizer – PC Card (When VIVID 900/910 is Selected)

Importing Data from the Memory Card of VIVID 910 or VIVID 900

This command is used to remote-control the data stored in the memory card of the VIVID 910 (VI-910) or VIVID 900 (VI-900).

Note

This command does not operate on step-shot scan data in the memory card.

Chapter 2

File

Menu

Memo

•Before performing the procedure below, make sure that the digitizer you are going to use is selected by the File

– Select Digitizer command.

•Note that if multiple VIVID units are connected, the software can only access the memory card in the

VIVID unit with the highest SCSI ID setting.

Ref. For details of the File – Select Digitizer command, refer to page 144.

Operating Procedure

1 From the [File] menu, select [Import], [Digitizer] and then [PC Card].

The [File-Import-Digitizer-PC Card] dialog box will appear.

Memo

• Only the raw image data (.cdm) scanned by the VIVID 910(VI-910) or VIVID 900(VI-900) will be displayed.

• Upper-case file names specified using the camera will be converted to lower-case file names when the files are imported to this software.

910

900

2 Select the file you want to import.		• To perform dark correction for the color data,
			check the [Dark Correction] checkbox.
		• To display the preview image, check the [Pre-
			view] checkbox (so that a check mark appears in
			the check box). A color image of the selected file
			will be displayed.
			Memo
		A clock icon will be displayed during loading.
Parameters for [File-Import-Digitizer-PC Card] Dialog Box
File name	Displays file names stored in the memory card.
Date	Displays the dates on which the files are stored in the memory card.
Size	Displays the size of each file (in bytes).
Total ∗∗files	Displays the total number of camera data files stored in the memory card.
∗∗ MB/ ∗∗ MB	Displays the unoccupied capacity and total capacity of the memory card.

96