File – Import – Digitizer – One Scan (When VIVID 910 is Selected)
10 Click on the [Scan] button.
At this time, the data in the Work window area
does not correspond to the one in the Store RED window area, so a red frame is displayed.
Chapter 2
File
Menu
11 Designate three or more corresponding points. Set the corresponding points in the work window and then store window alternately. When the corresponding points have been designated prop- erly, the red frame will turn to blue.
Memo
Registration with 1 pair of corresponding points must be used for objects with characteristic shape.
Since registration may not be performed successfully for objects with
If desired points are set by
By using middle button or left button + [Shift] button, registration can be performed when 1 or more pairs of corresponding points are set.
•Each time corresponding points are designated, registration among data is performed.
•If the [Auto Store] checkbox has been checked, proceed to Step 12 after the corresponding points are designated properly.
Left | : Sets a point. |
| (Registration is performed using 3 or more pairs of corresponding points) |
Middle | : Sets a point. |
([Shift] + Left) | (Registration is performed using 1 or more pairs of corresponding points) |
Right | : Points in a Work window area or Store window area can be de- |
| leted by clicking them in the reverse order in which they were set. |
Blue
9101 
2
3 | 4 |
5 | 6 |
54