Instruction manual for each model in

VIVID digitizers offers rapid, high-precision 3D scanning ideal for imaging of in-

the VIVID series of non-contact 3D

dustrial products in a wide range of shapes and configurations. This manual describes the

digitizers

digitizer’s features and operating procedures, and calls attention to relevant precautions.

 

 

Photogrammetry System

Explains the PSC-1 system, a high-precision alignment system based on photographic

PSC-1 Instruction Manual

measurement technology. This system is for use in the VIVID 9i only.

 

 

Bench Top Frame Set

This manual explains how to set up the Bench Top Frame Set, which offers more

stable measurements both horizontally and vertically, and how to attach the VIVID

Instruction Manual

910(VI-910) or VIVID 900(VI-900) to the set. This frame set is for use with VIVID

 

910(VI-910) or VIVID 900(VI-900) only.

 

 

Safety Precautions

When using this software, the following points must be strictly observed to ensure correct and safe use. After you have read this manual, keep it in a safe place so that it can be referred to easily whenever it is needed.

WARNING

Failure to adhere to the following points may

result in death or serious injury

To ensure correct and safe use of this software, please read the instruction manuals of the VIVID (VI) series digitizer and personal computer in addition to this manual before operating. Incorrect operation of the software may result in fire or electric shock.

Software Restrictions

•Copying or reproduction of all or any part of the contents of this software and manual without KONICA MI- NOLTA SENSING’s permission is strictly prohibited.

•The specifications of the software are subject to change without prior notice.

•KONICA MINOLTA SENSING will not take any responsibility for damage caused as result of use of this software.

Notes On Use

•When inserting a CD-ROM into the CD-ROM drive, make sure that it is placed straight in the right direction, and inserted gently.

•Keep the CD-ROM clean. If it becomes dirty, a reading or writing error may result.

•Pay attention to rapid temperature changes and dew condensation.

•Keep the CD-ROM away from direct sunlight or heaters.

•Do not let the CD-ROM drop or be exposed to strong shocks.

•Keep the CD-ROM away from water, alcohol, thinner etc.

Notes On Storage

• Do not store the CD-ROM in a hot area, for instance, in direct sunlight or near heaters.

1