12 Click on the [Store] button.

The data displayed in the Work window area will appear in the Store window area. If the corresponding points have been properly des- ignated, all the stored data will be displayed in 3-D in the element view window after it is registrated and three-dimensionalized.

13 Repeat Steps 9 to 12 until the desired corresponding points are designated.

14 Click the [OK] button.

The data displayed in the element view window by the Store function will remain as is.

File – Import – Digitizer – One Scan (When VIVID 910 is Selected)

•This step is not necessary if the [Auto Store] checkbox has been checked.

Chapter 2

File

Menu

•If [Save Raw Data] checkbox in [File-Import

-Digitizer-One Scan-Option] dialog box has been checked, [Save As] dialog box will be displayed. The data will be saved as a CDM file.

q Enter the desired file name. w Click the [Save] button.

Note

The file name must consist of alphanumeric characters only.

1

2

 

• Clicking on the [Cancel] button will delete the

910

elements that were displayed in the store window when the [Store] button is clicked at the end of execution of this command.

55