Build – Smooth – Points

Smoothing the Selected Points

This command is used to make the boundary of the points selected in the currently displayed element smooth as well as to regularize surface points density.

Operating Procedure

1

From the element list, select one desired

 

element.

2 Select the desired points.

3 From the [Build] menu, select [Smooth] and then click [Points].

The [Build-Smooth-Points] dialog box will ap- pear.

The selected element will be ready to be dis- played in all windows. It will be displayed if it is not displayed in the active window or the windows for which all the elements are set to be displayed.

4 Set the parameters.

5 Click the [Apply] button.

The boundary of the selected points will be smoothed according to the parameter settings and then displayed.

If you change the parameter settings and click the [Apply] button again, the element will be smoothed according to the new parameter set- tings.

Chapter 2

Build

Menu

6 Click the [OK] button.

This will confirm execution of smoothing and

close the dialog box.

 

Parameters for [Build-Smooth-Points] Dialog Box

Weight

Used to set level of regularization of surface points density.

Repetition

Used to set level of smoothness.

9i

910

900

700

300

205