6 Set optional parameters.

Item

Explanation

 

 

Scan Parameter

Sets the settings for scanning.

 

 

Convert Parameter

Sets the settings for three-

 

dimensionalization.

Stage Parameter

Select the rotary stage to be

 

used.

[Default] button

Clicking this restores the

 

default settings.

Ref. For details, refer to the parameters (P.49) for [File- Import-Digitizer-Step Scan-Option] dialog box.

7 Click the [Apply] button to check whether the rotary stage has been initialized successfully.

If the rotary stage has been initialized success- fully, the [Scan] button will be effective.

•If initialization is not successful, turn off the power to the rotary stage power, turn it on again, and then click the [Apply] button.

•Select “Free” for [Rotation Step] in [Stage Param- eter] field, and click [Apply]. If the stage has been recognized properly, a stage slide bar and [Chart Scan] button will be displayed at the bottom of the work window when the [File-Import-Digi- tizer-Step Scan-Option] dialog box is closed.

8 After necessary settings are made, click the [OK] button.

The settings will be set and the [File-Import- Digitizer-Step Scan-Option] dialog box will close.

File – Import – Digitizer – Step Scan (When VIVID 9i is Selected)

Chapter 2

File

Menu

•If the rotary stage has already been used and if there is no need to change the settings, initialization of the rotary stage can be performed by clicking on the [Stage Apply] button in the [File-Import-Digitizer-Step Scan] dialog box instead of the [File-Import-Digitizer-Step Scan-Option] dialog box.

9i

43