Konica Minolta Build – Move – Points, [P] (Effective while held down)

Build – Move – Points [P] (Effective while held down)

Moving the Selected Points

This command is used to move the selected point(s).

Note

Execution of this command may not display simplified data.

Left	: Moves the point(s) using the mouse.
Middle ([Shift] + Left)	: Moves the point(s) along the major axis.
Right	: Moves the point(s) by entering values.

Operating Procedure

1 From the element list, select the desired elements.

2 Select the point(s) you want to move.

3 From the [Build] menu, select [Move] and then click [Points].

The selected element will be ready to be displayed in all windows. It will be displayed if it is not displayed in the active window or the windows for which all the elements are set to be displayed.

•If you select all of the element’s points at Step 2 above, this command becomes equivalent to the Build – Move – Elements command.

Ref. For information about the Build – Move – Elements command, see page 189.

Chapter 2

Build

Menu

4 Dragton. the points with the left mouse but-

The point(s) will move accordingly.

•Dragging with the middle (or [Shift] + Left) but- ton will move the point(s) along the major axis.

5 Press the [ESC] key.

Build – Move – Points mode will be canceled.

9i

910

900

700

300

187