2) Connecting the protect key to the computer

When using Polygon Editing Tool, it is necessary to attach the protect key and install the protect key (HASP) driver to the computer before installing Polygon Editing Tool.

Attach the protect key to the computer correctly according to the following procedure.

Memo

The installation procedure is also given in the “READ- ME_E.txt” file in the “Polygon Editing Tool” directory of the software’s CD-ROM.

nInstalling the protect key driver software (HASP driver) on the computer

In order for the protect key to be recognized by the corresponding driver software, it is necessary to install the driver software on the computer before connecting the protect key to the computer.

Operating Procedure

1 Start Windows and insert the software CD-ROM into the CD-ROM drive.

2 From Explorer, execute the “HASPUser- Setup.exe” file stored in the CD-ROM.

The driver setup program will start.

3 Follow the instructions displayed on the screen to complete installation.

The protect key driver will be installed.

nConnecting the protect key

Connect the protect key to the USB port of the computer.

*Insert the protect key into the computer’s USB port straightly and carefully.

1Connect the protect key to the computer’computer’s USB port.

Chapter 1

Preparations

9