Chapter 1
Preparations
nRecognition of the VIVID digitizer by the computer
The first time the VIVID digitizer is connected to the computer, cause the computer to recognize the VIVID digitizer as an external device by following the procedure below.
Note
It is not necessary to install the device driver of the VIVID digitizer on the computer; however, Polygon Editing Tool cannot control the digitizer until recognition has been completed.
Operating Procedure
1 After connecting the digitizer to the computer, switch on the computer. The digitizer will be recognized by the computer as a new external device, and then the Hardware Wizard will start.
2 A dialog confirming whether or not to connect to Windows Update will appear first. Check the “No, not this time” checkbox and then click “Next”.
3 When a dialog for confirming the driver installation method appears, check the “Install from a list or specific location (Advanced)” checkbox and then click “Next”.
14