Peerless Industries KX-TDA15, KX-TDA100 manual Hold Transfer to Trunk Transfer to Extension, Mode

			1.12 Holding Features
	Hold	Transfer to Trunk	Transfer to Extension
	Flashing the hookswitch	Flashing the hookswitch	Flashing the hookswitch
Mode 1	+	+	+
	Going on-hook	Trunk Access No.	Extension No.
	Flashing the hookswitch	Flashing the hookswitch	Flashing the hookswitch
Mode 2	+	+	+
	Hold Feature No.	Trunk Access No.	Extension No.
(Default)
	+
	Going on-hook
	Flashing the hookswitch	Flashing the hookswitch	Flashing the hookswitch
	+	+	+
Mode 3	Hold Feature No.	Hold Feature No.	Extension No.
	+	+
	Going on-hook	Trunk Access No.
	Flashing the hookswitch	Flashing the hookswitch	Flashing the hookswitch
	+	+	+
Mode 4	Hold Feature No.	Hold Feature No.	Hold Feature No.
	+	+	+
	Going on-hook	Trunk Access No.	Extension No.

If the following occurs frequently with an SLT, choose "Mode 2", "Mode 3", or "Mode 4":

a)When an SLT user receives a call, reorder tone is heard or nobody answers the call.

b)When an SLT user goes off-hook, reorder tone is heard instead of a dial tone.

If a call is not terminated after going on-hook, the above cases occur. To avoid these problems, choose "Mode 2", "Mode 3", or "Mode 4". Every call will be terminated unless the Hold feature number is entered after flashing the hookswitch in Mode 2, Mode 3, and Mode 4.

•Hold Alarm tone pattern has a default. ( 4.2.1 Tones/Ring Tones).

User Manual References

User Manual

1.4.2 Holding a Call

Feature Guide 133